Irrigation Installations Sydney
A good irrigation system starts with proper planning, not just installation. The right zones, controller, valves, dripline, sprayheads and pressure make the difference between a system that is set up to water evenly and remain serviceable over time and one that leaves dry patches, wastes water or needs constant attention.
Smit Irrigation designs, installs and upgrades practical irrigation systems for homes, strata common areas and commercial properties across Sydney and the Northern Beaches. We plan each system around your site — water supply, pressure, flow, lawn areas, garden beds, planting, access and controller location — so it performs correctly and stays easy to maintain.
We're an irrigation installation, servicing and fault-finding specialist, not a general landscaping company. Our focus is watering performance: getting water to the right areas, with zones, valves, controller programming and coverage planned around the site.
Who This Service Is For
We install and upgrade irrigation systems for homeowners, strata managers, owners corporations and property managers, builders, landscapers and commercial property managers across Sydney and the Northern Beaches.
Whether it's a single home system or a larger site with multiple zones, we plan the installation around how the area actually needs to be watered.
- Homeowners wanting a new system for lawns and garden beds
- Homeowners upgrading an old or unreliable system
- Strata managers, owners corporations and property managers responsible for common-area gardens and lawns
- Builders and landscapers needing irrigation installed as part of a project
- Commercial property managers maintaining grounds, landscaping and green space
Common Irrigation Installation Needs
People typically come to us when they need the following.
If your existing system is mostly sound but not performing, an irrigation audit or fault finding visit may be a better first step than a full installation.
- A brand-new irrigation system for a new or renovated garden
- Lawn irrigation planned for even coverage and reduced dry or overly wet areas
- Garden bed dripline for efficient, targeted watering
- An upgrade from an old, patchy or failing system
- More zones added as gardens or lawns expand
- A new controller, or a Wi-Fi / Hydrawise upgrade
- Solenoid valves and a valve manifold installed or replaced
- Rain sensor and smarter watering options to help reduce unnecessary watering
- Irrigation installed as part of a landscaping or building project
Why Proper Irrigation Planning Matters
Many irrigation problems start with poor planning rather than the parts themselves. A system that isn't matched to the site's water supply, pressure and flow will struggle no matter how good the components are.
Proper planning means considering how much pressure and flow the supply can deliver, how many zones are needed so each area gets enough water, which areas suit sprayheads and which suit dripline, and where the controller, valves and wiring should sit for reliability and maintenance access.
We plan installations so each zone is designed to operate within the limits of your water supply, pressure and flow.
What Smit Irrigation Checks Before Installation
Before recommending or quoting an installation, we assess the things that determine how the system should be built.
Accurate installation recommendations depend on this on-site inspection. We don't promise perfect coverage or firm pricing without assessing site conditions first.
- Water supply, pressure and available flow
- Site layout, lawn areas, garden beds and planting types
- Zone requirements and how areas should be grouped
- Sprayhead vs dripline suitability for each area
- Controller location and power
- Valve and manifold locations
- Field wiring and common wire runs
- Maintenance access for future servicing
- Your requirements, budget and how the space is used
Lawn Irrigation Installation
Lawns need even, overlapping coverage to stay healthy without wasting water. We install lawn irrigation using correctly spaced sprayheads matched to your pressure and flow, grouped into zones so each area of lawn receives consistent watering.
We plan head spacing, nozzle selection and zone layout around the shape and size of the lawn — to support more even coverage and reduce dry corners or overly wet areas.
Garden Bed Dripline Installation
Garden beds, hedges and dense planting are usually best watered with dripline rather than sprayheads. Dripline delivers water close to the root zone and can reduce evaporation and overspray compared with spray watering, and keeps water off paths, fences and walls.
We install dripline laid out for the planting, with the right spacing and flow, connected into its own zones so garden beds and lawns can be watered independently and appropriately.
Sprayhead Installation and Coverage Planning
Sprayheads are ideal for lawns and open areas. Getting coverage right is about more than just placing heads — it depends on spacing, nozzle choice, pressure and flow.
We plan and install sprayheads so their spray patterns are set up for appropriate overlap and coverage, matched to the water supply so each zone performs as intended. Where pressure or flow is limited, we plan zones accordingly rather than overloading a single zone.
Solenoid Valve and Manifold Installation
Solenoid valves control which zone is watering and when. We install solenoid valves and, where suitable, a valve manifold that groups the valves together in one accessible location.
A well-planned manifold can make the system easier to understand, service and expand later. We consider valve location, wiring and maintenance access so future servicing is straightforward.
Controller Installation and Programming
The controller is the brain of the system. We install controllers in a suitable, accessible location with power, connect the field wiring and common wire, and program the controller for your zones, run times and watering schedule.
We set up the programming around the planting, lawn areas and how the site is used, and walk you through how it works so you're comfortable adjusting it seasonally.
Hydrawise / Wi-Fi Controller Setup
For smarter watering, we install and set up Wi-Fi controllers such as Hydrawise. These let you monitor and adjust your system from your phone and can support weather-based watering adjustments where set up correctly.
We handle the controller installation, zone setup, programming and connection so it's ready to use. Wi-Fi controller performance depends on a usable signal at the controller location, which we take into account during planning.
Rain Sensor and Smart Watering Considerations
A rain sensor helps avoid watering when it isn't needed, reducing waste and keeping watering appropriate to the weather. We can install rain sensors and set up smart watering features as part of a new system or upgrade.
We'll advise where these add real value for your site rather than adding features that don't suit how the system is used.
Pressure, Flow and Zone Planning
Pressure and flow set the limits of what any irrigation system can do. Too many heads on one zone and coverage suffers; poorly planned zones waste water and stress the system.
We assess pressure and flow, then plan zones so each one operates within those limits and delivers even coverage. Good zone planning helps the system water more reliably, area by area, without dry patches or pressure loss.
Irrigation System Upgrades
If you already have a system that's tired, patchy or outdated, an upgrade is often more practical than a full replacement. Common upgrades include replacing failing sprayheads or converting garden beds to dripline, adding or re-planning zones for better coverage, installing a new controller or upgrading to Wi-Fi / Hydrawise, replacing solenoid valves or consolidating them into a manifold, and adding a rain sensor and smarter watering.
We assess what's worth keeping and what should be upgraded, so you spend where it makes the most difference to performance.
Commissioning, Testing and Handover
Installation should not finish when the parts are in the ground. Once a system is installed, we commission it — running each zone, checking coverage, adjusting sprayheads and dripline, confirming valves and wiring operate correctly, and setting the controller programming.
We then hand over the system and explain how it works, so the owner or site contact understands how to run and adjust it. Where further adjustment or seasonal tuning is sensible, we'll say so rather than leave it unclear.
Irrigation Installation for Homes, Strata and Commercial Sites
Residential irrigation installation
For homes, we install systems that keep lawns and gardens healthy while being simple to run and easy to maintain. We plan zones for the different areas of the garden, choose sprayheads or dripline to suit each area, and set up a controller you're comfortable using. The goal is even, reliable watering that suits your garden and water supply — not an over-complicated system.
Strata and common-area irrigation installation
For strata managers, owners corporations and property managers, we install and upgrade irrigation for common-area lawns, gardens and landscaped grounds. We plan systems for reliable coverage across shared spaces, with clear zoning, accessible valves and controllers, and maintenance access that makes ongoing servicing straightforward, plus clear notes on what's installed for record-keeping.
Explore our strata irrigation maintenanceCommercial irrigation installation
For commercial properties, we install irrigation planned around larger or more complex sites — grounds, landscaping and green space that need dependable, even watering. We assess water supply, pressure and flow, plan zones for the site, and install controllers, valves and wiring for reliability and maintainability. We focus on systems planned for consistent performance and practical servicing over the life of the property.
Explore our commercial irrigation maintenanceWhen an Irrigation Audit or Fault Finding May Be Better First
A full installation isn't always the right starting point. If your existing system is largely sound but underperforming, it may be more cost-effective to start with an irrigation system audit, fault finding, or targeted repairs.
We'll give you an honest view of whether an upgrade, repair or a fresh installation makes the most sense for your situation.
Frequently Asked Questions
Planning a New Irrigation System or an Upgrade?
Whether it's a single home garden or a larger strata or commercial site, we'll plan an irrigation system around your site conditions, water supply and how you want the space watered — and give you clear, practical recommendations.
Specialists in Irrigation Performance. Based in Beacon Hill. Servicing Sydney and the Northern Beaches.
We don't promise perfect coverage or firm pricing without assessing site conditions first.
